|
White Cement Based Putty :
Neo's Wall Putty is Hybrid White Cement base putty for interior
/ exterior cementanlous surfaces. "Build plus" wall putty has
extraordinary adhesion strength, and most dependable and durable, It
gives a superior wall finish and greater paint effects. It doesn't
required water curing. It is Suitable for all kind of paints.
Application :
Use only on interior/exterior cementanious surfaces. The surface
should be free from dirt, loose particles & residual paints. Clean
the surface with sand paper or wire brush. Moisten the surface
sufficiently.
Mix the "Build Plus" putty with water at a 60-40 ratio. It is better to
prepare in small quantities, and applied within 2x1/2-3 hours, Mix the
putty for 10-15 minutes till workable consistency will achieve.
Apply wall putty on moistened surface with the help of putty knife or
trowel. Total thickness of both the coats should not be more than
1.5mm. Let the coated surface dry of surface apply fine emery or sand
paper to smoothen surface. Now the surface is ready for painting.
Precaution :
Build Plus wall putty contain only non toxic materials still
care should be taken to avoid dust inhalation while mixing and
handling. In case of contact with eye of mouth was with plenty of water
keep it in dry place & out of reach of children.
Packing :
1 kg. 5 kg, 20 kg.
Tensile adhesion strength at 28 days
|
:
|
2.3N/mm2
|
Compressive strength at 28 days
|
:
|
14 N/mm2
|
Pot life
|
:
|
2 - 3 hours.
|
Water demand by volume
|
:
|
30-40 %
|
Surface Hardness
|
:
|
3.0 N
|
Maximum thickness of the total Coats
|
:
|
1.5 mm.
|
Coverage on smooth surface
|
:
|
20 - 25 sq. Ft/Kg./mm
|
|
